欢迎光临惠州美森板业有限公司!

24小时咨询热线:

(+86)752-6925519
E-mail: Alison@meisenboard.com

包装运输加工


如果用货车短途运输硫氧镁板,可以采用手工装卸,不需要支撑板或其它特殊包装。
如果长途运输或集装箱,可采用木托架包装。

For short-distance transport by truck, you can manually load and unload, no need supportboard and other special packaging.
For long-distance transport by container, it is better to use wooden tray packaging.

禁止单人搬运,注意边角保护。

需要两名工人一起将板抬起,双手尽量分开,托起板的两边,防止板材过度弯曲。

建议将板竖立搬运,当板的厚度小于8mm时,建议每次两块重叠搬运。

Forbidding single handling and pay attention to cornerprotection.

Lifting the plate with two workers, hands apart to hold up theboth sides of boards on and prevent excessive bending.

Proposed to erect the plate during transportation, when theplate thickness is less than 8mm, it is recommended to stacktwo sheets for handling.

保证底部平整,每垛高度小于1000mm,存放高度小于3000mm 不能零散地直立放置板材,应按规格、种类整齐平叠堆放。存放处必须干燥、无漏水、渗水现象,保证板材的优越性能。

Ensure that the bottom is smooth, each stack height is less than1000mm and storage height is less than 3000mm.
Sheet can not be scattered in upright position, should be neatstacked according to specifications and types.
Repository must be dry and free of leakage, water leakage, inorder to ensure the superiority of plate.

手工切割玻镁植纤复合板,可用一般木工锯和手提切割机完成。如在现场切割大批板材,建议使用金刚石锯片的电动锯台。对于厚度在小干或等于9mm的板材也可用美工刀片进行划断。
可用电钻或开孔器任意在距边缘10mm以上的板面上钻孔或开方孔。

Hand-cut glass fiber composite plate magnesium plant general woodworking saws and portable cuttingmachine ore avalable cut o large number of plates n the field it is recommended to use an electrdiamond saw blade saw table For blade plute whose thickness is less than or equal to 9mm blade platoart knife is available.
Any drill or hole saw can be used in the surface of plate where is more than )omm from the edge.


加工工具Processing tools

美工刀 Knife

金刚石锯片 Diamond saw blade

手提切割机 Portable cutting machine

木工锯 Woodworking Saw

汽钉 Air nails

自攻螺丝(建议用带沉头的不锈钢自攻螺丝) Self-tapping (screws recommended stainless steel head with self-tapping screws)


在线留言

Online message

验证码

欢迎来电咨询

(+86)752-6925519

E-mail:

service@meisenboard.com

Copyright ©2017  惠州美森板业有限公司  技术支持:惠州北易 防火板|防火板厂家|玻镁板|玻镁防火板|玻镁板厂家广东省惠州市博罗县石湾镇滘源路118号